If you cannot work from underneath, then you need to work from in the tub. In small curves where plywood will not fit well, you will have to apply layers of fiberglass and epoxy. This bottom may be stronger than before, which is a good reason to go in from the bottom. Push the plywood in place until the epoxy sets. Then, simply glue a piece of plywood, heavily coated with one of the high-density fillers, to the cracked area with any epoxy. Simply clean the tub, any tub cleaner will do, and sand it smooth with sandpaper this will prepare the surface for the glue. You should be able to see the cracks from underneath the tub, if not, and then try another way to repair the tub. Break through the drywall or plaster, with a hammer and chisel. If you can, go in from the ceiling, basement, or crawlspace. This way, you can reinforce the bottom of a tub or shower while sealing the cracks. Underneath the tub can sometimes work out better. Larger cracks can be reached from underneath the tub or in the tub itself. If the problem is larger, it will take a little longer to finish the repair.Īgain, clean and dry the tub to see the cracks. Or, you can use a hairdryer to speed up the process. Appliance touch up can be applied with a small brush and allowed to dry overnight. You can use either a fiberglass repair kit and follow the instructions on the box, or, appliance touch up should work. If it is a small crack, make sure your tub is clean and dry.Īcrylic Fiberglass Bathtub Crack Hole Repair| Cracked Shower Pan Repairs Are Worthless Unless The Underlying Cause Is Addressed. The degree of the repair depends on the size of the problem, i.e. Photo Credit: Suzanne Carter-Jackson By Wayne Presnell Fiberglass tub repair can seem very daunting, but if you have a drill, sandpaper, and glue, you can do it yourself.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |